Want a TV that sits securely without splurging on expensive brackets? You can make a reliable mount yourself using everyday materials. A well‑built DIY support saves money, lets you pick the exact height you need, and gives you the satisfaction of a job well done.
Start with sturdy wood like pine or oak, or go for metal square tubing if you have welding tools. You’ll also need heavy‑duty L‑brackets, wood screws (at least 3 inches long), wall anchors, and a drill. If you choose wood, a 2‑by‑4 board works great for the base plate. Metal gives a cleaner look but requires a bit more skill. Grab a level, a stud finder, and a measuring tape – they’ll keep everything straight.
1. Locate the studs. Use a stud finder to mark two vertical studs where the TV will sit. Measure the distance between them; this will be the width of your support.
2. Cut the base board. Saw a 2‑by‑4 to the exact stud width, then add a couple of inches on each side for extra stability. Drill three pilot holes through the board into each stud and secure it with lag bolts.
3. Attach the brackets. Place two L‑brackets on the board, aligning them with the studs. Screw them in tightly using wood screws. The brackets will hold the TV’s mounting plate.
4. Build the back plate. Cut another piece of 2‑by‑4 to the same width and attach it to the rear of the base with screws, creating a sandwich that spreads the load across both studs.
5. Mount the TV plate. Screw the TV’s VESA mounting plate into the front of the L‑brackets. Make sure the plate is level before tightening fully.
6. Hang the TV. With help, lift the TV onto the plate and lock the bolts. Double‑check that it’s secure and doesn’t wobble.
7. Finish and hide cables. Run power and HDMI cords through a drilled hole in the base board, then cover with a simple cable cover or a decorative trim.
Take a step back and make sure everything feels solid. A quick push test will tell you if any screws need tightening.
Safety tip: never mount a TV above 60 inches without a professional opinion, especially if you have kids or pets. If the wall is plaster or drywall without studs, consider a ceiling-mounted option instead.
Now you have a custom DIY TV support that looks clean, holds strong, and saves you a lot of cash. Feel free to paint the wood or add a decorative finish to match your room’s style. Enjoy movie nights with a mount you built yourself!
Worried about what to do with your TV after losing the stand? You’ve got more options than you might think. This article covers practical ways to support your TV without its original stand, using solutions from wall mounting to household hacks. Learn how to keep your screen safe, steady, and stylish — even if your pets love to zoom around the living room. No need for fancy tools or special skills; real tips for real homes.
More